HOME

ABOUT

MOTOR CYCLES

PAST PROJECTS

CARS & MECHANICS

STEEL
ROSES

LINKS

Pug 106

Ok so here is a spec on the car, the mods i have done should all be listed below. most likely to be listed in the sort of order i completed them with the newest things last.

Mod specification for the Pug: As of November 12th 2004

K&N57i Induction kit with cold air pipe fitted
Custom made exhaust system with 'Wasp' dual slash cut 2.5" ovals backbox and a 'Cherry Bomb' centre section
'OMP' strutbrace, the GTI version so it fits around the K&N airfilter
Dropped the front with 60mm 'GMAX' lowering springs and dropped the torsion bars 50mm on the back
'Ripspeed' drilled aluminium competition mesh in lower and upper grill
'TowTrust' towbar fitted so i can tow my bikes on a trailer
'Alpine' CDA-9812RR Headunit fitted
'Pioneer' 240watt 6x9s fitted into the parcel shelf and 'Infinity' 130mm speakers in the front
'Ripspeed' Jet 15" alloys fitted on 20mm spacers, rear arches modded to fit, and calipers/drums painted blue to match

General specification for the pug

1124cc OHC TU1M+ series engine, puts out 60bhp @ 5100rpm
or 44.1kw and torque is 87.5Nm @ 3800rpm
5 speed manual gearbox
Length of car: 3678mm
Width of car: 1588mm
Wheel base: 2385mm
Front track: 1420mm
Rear track: 1345mm